Audi Radio Code Keygen

Our AUDI radio codes are available 24 hours a day 7 days a week. We guarantee our radio decodes work, and its totally FREE!

1. Audi Radio Code Reset A4
2. Audi Radio Code
3. Audi Radio Code Keygen Cubase

How To Find Your Audi Radio Serial.

Audi Radio Code Reset A4

There are 2 types of Audi serial numbers (Audi Navigation Plus see method 2). It is quite simple to remove your Audi radio. You will need a set of radio release keys (PC5-83). These are inexpensive and are around £3 – £5, you can obtain them from a local car audio shop or Halfords.

Feb 23, 2019 Generate code to unlock radio. AUDI RADIO CODE GENERATOR. Audi Serial Number locate in Audi car radios will normally contain a 14 number serial which can be found either printed on a label on the side of the unit.These serials are only visible on once the Audi radio has been removed from the vehicle out. Understanding the information on the sticker is key. All of the installed options are listed in the form of three-digit production codes called “PR codes” as shown on the label above (taken from an 2006 Audi A3). As an example of the use of these codes, assume that an ABS module failed on this A3.

Once you have the radio release keys, push them into the 4 holes in each corner of the radio (See image), apply a little pressure and the radio will release from the dashboard. The radios label will be located on the radio’s casing.

What To Do NextThe Audi radio serial is a 14 digit serial number for example AUZ1Z1F6412082. Please see image for reference.

For Audi Navigation Plus

Audi Radio Code

With the Audi Navigation Plus system the serial can be displayed on screen rather than taking out the radio unit.

Instructions!

1. Submit your Radio Serial and your email!
2. You will then be redirected to download your code this is important! As you will be receiving an email when the code is activated

• Once your radio is on and appears in “SAFE” mode
• Repeatedly press the P.SCAN and RBDS buttons, holding them down, until “1000” lights up. Release the buttons. (Do not continue to hold or press the buttons, or your radio unit will think you are entering the decode “1000”)
• • Repeatedly press button 1 until the correct first digit of the code is displayed.
  • Repeatedly press button 2 until the correct second digit of the code is displayed.
  • Repeatedly press button 3 until the correct third digit of the code is displayed.
  • Repeatedly press button 4 until the correct fourth digit of the code is displayed.
• If you have entered the code correctly on the radios display, press the P.SCAN and RBDS simultaneously again, holding down until SAFE is displayed.

• Once your radio is on and appears in “SAFE” mode
• Repeatedly press the FM 2 and RDS buttons, holding them down, until “1000” lights up. Release the buttons. (Do not continue to hold or press the buttons, or your radio unit will think you are entering the decode “1000”)
• If you have entered the code correctly on the radios display, press the FM 2 and RDS repeatedly again, holding down until SAFE is displayed.

• Once your radio is on and appears in “SAFE” mode
• Repeatedly press FM (1/2) and DX buttons, holding them down, until “1000” lights up. Release the buttons. (Do not continue to hold or press the buttons, or your radio unit will think you are entering the decode “1000”)
• • Repeatedly press button 1 until the correct first digit of the code is displayed.
  • Repeatedly press button 2 until the correct second digit of the code is displayed.
  • Repeatedly press button 3 until the correct third digit of the code is displayed.
  • Repeatedly press button 4 until the correct fourth digit of the code is displayed.
• If you have entered the code correctly on the radios display, press the FM 2 and RDS repeatedly again, holding down until SAFE is displayed.

• Once your radio is on and appears in “SAFE” mode
• Repeatedly press FM 1 and AM buttons, holding them down, until “1000” lights up. Release the buttons. (Do not continue to hold or press the buttons, or your radio unit will think you are entering the decode “1000”)
• • Repeatedly press button 1 until the correct first digit of the code is displayed.
  • Repeatedly press button 2 until the correct second digit of the code is displayed.
  • Repeatedly press button 3 until the correct third digit of the code is displayed.
  • Repeatedly press button 4 until the correct fourth digit of the code is displayed.
  • The 1st button will only be a 1 or left blank, the following three digits will be number 1 through 9.
• If you have entered the code correctly on the radios display, press the FM 1 and AM repeatedly again, holding down until SAFE is displayed.

Once your radio is on it should appear “CODE”

If you press the Preset Station Selector Button “Code” will be replaced by “0000”

• Repeatedly press button 1 until the correct first digit of the code is displayed.
• Repeatedly press button 2 until the correct second digit of the code is displayed.
• Repeatedly press button 3 until the correct third digit of the code is displayed.
• Repeatedly press button 4 until the correct fourth digit of the code is displayed.
• The 1st button will only be a 1 or left blank, the following three digits will be number 1 through 9.
• Make sure to enter the code in the space of 1 minute or it will interrupt the process.

Audi Radio Code Keygen Cubase

• If you have entered the code correctly on the radios display, press the fifth button.